Acryl-Marvel in the Operatory? Yes, Now it’s Possible!

Our Acryl-Marvel has been incredible in the lab, cutting polishing time of your restorations way down. Some practitioners and lab techs are surprised to get so much from a dental lab product. Now, you don’t have to go back and forth between pumicing and final polishing. Acryl-Marvel will give your acrylic restorations a beautiful shine in one step.

But until recently, there were multiple cross-contamination procedures that had to be followed to use this product in the operatory. And it might be necessary for the dentist to move back and forth between the dental lab and the operatory to get the final adjustments made and a final smoothing and polishing done. That all ended when we created the Acryl-Marvel Adjustment Kit.

Stay Chairside and Save Time

If you could just smooth and polish a final adjustment of a restoration chairside and NOT have to go through elaborate (and required by law) cross-contamination prevention steps, that would save motion and save time, both for the dentist and the patient who is sitting there waiting. Now there are Acyrl-Marvel individual case ingots for your use.

Trim the denture with carbide or other cutting instrument and get it just right. Then you don’t have to use pumice to make the initial smoothing of the cut surfaces. Just apply Acryl-Marvel to the wooly you get with the kit, and polish the denture. No wet work needed, no pumicing, no moving to the lab.

You can get the same effect by going to the lab, but why would you want to?

A Great Use of Acryl-Marvel Ingots

I can provide these ingots – and others, like the Ceramo-Dotz for ceramics, lithium disilicate and other materials – in small plastic bags, ready for labs to send out with the finished work. When the customer gets the package, there’s the final polishing compound and a polishing wooly. All the customer has to do is make final adjustments, use the Acryl-Marvel and polishing wooly to smooth the trimmed edges and provide a final shine and they are done. They don’t have to think about stocking materials for the work done in the operatory.

When the lab includes a thank-you message with the delivery, this little gift acts as a powerful promotional message to customers.

By the Way, Any Problems with Acrylics?

I’ve been reading about people’s problems with acrylic pours. There’s shrinkage, there’s changes of colors between the time the material is cast and when it is cured. If you are having these problems, then you should look at another of our dental lab supplies, DVA Perfect Pour. As usual, our understanding of these materials has enabled us to manufacture a superior product that eliminates time in manufacture. If you are having to remanufacture acrylic products – ever! – then you should try our Perfect Pour. I think you will find that it makes your job so much easier.

And then, of course, when the restoration has been created, you have our Acryl-Marvel to do the perfect finishing with!