n
string(0) ""
	

All posts by dentalventures

Avast AV Product is Not really Responding? Let me provide How to Correct it

If you’ve pointed out that your Avast security service plan is certainly not responding, after that you’ve probably run into one of two key problems: damaged main data or contrapuesto third-party applications. One way to correct this problem can be to restart the service. Yet , this solution might not usually be sufficient. In the event the problem persists, you should search for help via Avast customer service. They will help you troubleshoot the issue and find a solution.

Incorrect configuration of your AUDIO-VIDEO security program is another prevalent cause of this challenge. It happens mainly because of the damaged Microsoft windows data record or a mistake in the setup of your security service. Luckily, this issue is not difficult to fix. Contacting Avast support can help you resolve the situation. In most cases, an easy change in the settings www.original-it.info/board-portal-features-comparison-for-better-understatement will repair the problem. If the difficulty continues, you may need to contact Avast customer support.

Restarting your Avast software application can fix the problem. Whether it’s the latter, a restart with the system is going to solve the condition. If the trouble persists, a faulty window assistance plan setup certainly is the culprit. Also you can download a repair software from Avast’s website. It can be highly recommended to download a driver replace utility to automatically diagnostic scan your PC. Avast support is available around the clock.

The UI of Avast can also fail to weight. If this is the truth, it may be a problem with the setup of your home windows service. You can fix this kind of error by rebooting your computer. Whenever this doesn’t resolve your problem, Avast recommends searching for the latest variation of their application. Once it had been installed, the Avast reliability software should run effortlessly. If everything else fails, you can try a mend electrical power for Avast.

Info Room Service providers

There are many differences between info room suppliers, and these differences may seem minimal amount of, but can be hugely important whenever your project is normally on the line. The very first thing you should https://kjmarketingllc.com/technology/the-bitdefender-free-vs-avast-free/ look for is definitely qualified customer support representatives. An individual want to spend hours on hold just to get someone phoning around, or have to await several days and nights before they get a solution. Data area support is important, so you need to choose the data room corporation with the very best support workforce.

Data room service providers are cloud-based services that facilitate secure document showing and effort. They support deal-makers carry out their due diligence operations much faster and easier. Some of the features they have include QUESTION AND ANSWER tools, insights, and social bookmarks, and multi-factor authentication. Mainly because the technology continues to evolve, data room providers are responsible for these tools far more sophisticated. You must find a corporation that can offer you all of these features, as well as a user-friendly interface.

Think about a data bedroom provider, be sure to read the recommendations and assessments from their prior and current clients. Give particular focus to industry-specific evaluations. Most data room companies display their satisfied clients troubles websites. You can even read feedback from well-known companies. Data room provider ratings can be obtained on trustworthy review sites. Generally, scores are based on computer software functionality and overall performance. Be sure to read the testimonials and select the information room specialist that greatest meets your preferences.

Choosing the Best VPN Services

VPNs are often times praised because of their speed, but their actual https://bestvpnservices.info/express-vpn speed can be quite low. The main reason for this is the amount of encryption used as well as the distance from the location for the VPN server. Choosing the fastest VPN service is certainly not as tricky as it appears. You should look for a VPN which has fast computers in your favored country and in close closeness to you. Guarantee the servers will be RAM-only so that your connection isn’t really slowed down by data transfers.

ExpressVPN is a wonderful decision if you need swiftness, and you want to unblock most internet services. There is a Smart DNS feature lets you use VPN on non-supported devices. They have mobile software for iOS, Android, Glass windows, and macOS and can be downloaded directly on your router. They also have built-in danger protection and bypass INTERNET SERVICE PROVIDER throttling. Finally, they can support up to five simultaneous contacts.

IPVanish is another good choice due to its great price tag and key features. You can choose from over 2, 1000 VPN servers in 75 locations. Another great point about IPVanish is definitely their standard sales. Should you sign up for a year’s worth of VPN service, you can save even more money. IPVanish provides a variety of features and alternatives, including secureness, privacy, and dedicated machines. This means that you are able to access all of the content you want without having to worry about staying tracked.

How does Board Websites Help Your Board?

The use of mother board portals is usually rapidly elevating for boards and nonprofit corporations, but how do this technology help your board? Mother board portals will let you organize and manage plank meetings proficiently, while as well making the process of collecting and sharing information between board members far more convenient. By robotizing the process of preparing and introducing information for conferences, board sites eliminate the desire for physical board packs or emails. Panel portals can serve as a single origin of truth that allows directors to create informed decisions, while strengthening corporate governance.

When looking for a plank portal, select one that satisfies the demands of plank members and administrators. Potential benefits to board portals range from lowered material costs to better corporate and business governance. Paperless meetings keep costs down by eliminating the advantages of printed components and powerful resource hours. Panel meetings could be facilitated rapidly when compared with13623 few minutes, and changes to data files and documents best iot devices happen to be instantly forced. For example , panel members could easily view and download data on their smart phone. The benefits of panel portals are so numerous they can make a big impact on the performance of boards.

Just like any new software or perhaps technology, adopting of table portal software can be tough. To avoid this, consider choosing a board site provider that provides ongoing education and schooling, as well as support for adding users and creating mother board spaces. Make sure your provider provides two-factor authentication, end-to-end security, and third-party penetration studies. In addition , consider whether the table portal you select is local or multi-lingual. If it is, consider what language and location requirements your mother board members uses.

The very best Virtual Data Room Companies

As the name implies, virtual data rooms are definitely the electronic repositories for 1000s of documents. This sort of https://findcar.top/best-virtual-data-room-companies-for-any-industry/ storage and posting allows the advisor and client to get a single place to review and take care of documents over the entire purchase. In today’s active industry, document management is often a throbbing headache. To ease the burden, M&A experts are looking for the best virtual info room corporations to help reduces costs of the entire procedure.

Brainloop’s main module lends organizations a virtual board to get collaboration and communications. It features enterprise-grade security for sensitive information. Their mobile app allows users to sign in using two-factor authentication and meeting work schedule. Another of the most effective virtual info room corporations is netfiles Dataroom. It gives flexibility with bulk upload functionality, simply no file size constraint, and full-text search. This is a fantastic option for businesses that need to hold their files confidential and secure.

Having an electronic data bedroom means protection is of highest importance. Various digital data space providers deliver advanced protection measures. These kinds of features incorporate logging-in monitoring and IP restriction. They have to also offer multiple login authentication and accounts theft proper protection. In addition to the over features, additionally, it is important to consider the provider’s customer support and knowledge bottom. Furthermore, they must provide support round the clock. A fantastic virtual data room professional should be easy to set up and customize, having a minimum response time.

When you’re searching for a virtual info room organization, it’s worth considering several different alternatives. For example , Dropbox is a popular file-sharing platform that has reorganized how people take care of their data files. It is easy to make use of, allows users to share their very own data with anyone, and in many cases offers unlimited free space. But while this service may be convenient intended for small businesses, this lacks the characteristics of an data area.

“Polishing vs Glazing of Zirconia” A study from Boston University.

Dear Dental Professional:

A recent Boston University study, by Dr. D. Nathanson, published in the Feb. 2011 issue of the IADR. reported polishing zirconia vs. glazing resulted in less wear. “At 600,000 strokes, the polished zirconia caused significantly less wear to (human) enamel than either the glazed zirconia, Ceramco porcelain, or Cerec Mark II. The polished zirconia (surface) remained unchanged, but the glazed zirconia showed showed significant loss of the glazed layer.”

While DVA’s Zircon-Brite was in fact used in the polishing of the zirconia and porcelain materials assisting in the completion of this Boston University study, it is not mentioned within the abstract. Please scroll down for the abstract.

1650 Human Enamel Wear Against Four Dental Ceramics In Vitro

IADR 2011
Friday, March 18, 2011

G. BASUNBUL, and D. NATHANSON, Dept of Restorative Sciences Biomaterials, Boston University, Boston, MA

Full contoured zirconia crown is a newly developed restorative concept.
Objective: To assess the wear effect of zirconia on human enamel in vitro.
Materials and Methods: Ten rectangular bars (10 x 5 x 3 mm) were prepared from the following ceramic materials: a) Polished Zirconia (Weiland), b) Glazed Zirconia (Weiland), c) Polished Porcelain (Ceramco 3) and d) Polished Porcelain blocks (Mark II, Vita). The bars were mounted in a wear simulator machine. Enamel specimens (2 x 2 x 5 mm) were sectioned from freshly extracted natural teeth using ISOMET 2000 Precision saw and attached to metallic rods, loaded under a constant load of 400 g and tested in reciprocating movements (6 mm travel distance) against ceramic bars in water for 60,000 and 600,000 strokes. Wear was determined by measuring loss of enamel height using digital micrometer (Mitutoyo). Ceramic loss was assessed using an optical microscope with an electronic micrometer.

Results: One-Way ANOVA (at P=0.05) and Tukey test were used to analyze the data.

Mean height loss of enamel against ceramic groups in microns is shown in table 1. Mean height loss of ceramics in microns is shown in table 2.

PolishedGlazed Polished CeramcoPolished CEREC Mark
ZirconiaZirconia3II
60,000 62(26.2)
121 (47.7)N/A647(246)
600,000 77(35)1126(315.1)1424(280.2)685(213.9)

PolishedGlazedPolished CeramcoPolished CEREC Mark
ZirconiaZirconia3II
60,000 0(0)25.1(8.6)N/A2.8(2.2)
600,000 0(0)162.8(40.9)88(10.2)24.5(5.8)

Conclusion: At 600,000 strokes, the polished zirconia caused significantly less wear to enamel than either the glazed zirconia, Ceramco porcelain or CEREC Mark II. Polished and glazed zirconia caused significantly less wear than CEREC Mark II after 60,000 strokes. The polished zirconia remained unchanged, but the glazed zirconia showed significant loss of the glaze layer.

ZIRCON-BRITE is available in a 20 gr jar and Individual brushes loaded with Zircon-Brite.

Call Dental Ventures of America, Inc. at

800.228.6696 to Order Today!

Beyond the Joneses by Jerry P. Honstein

During a presentation at the Chicago Midwinter many years ago, Dr. Robert Stein of Boston, made a comment I have never forgotten.  He stated, “When we dentists cut a preparation, the first thing we do is make a mistake, and then spend significant time correcting it!” I have often thought of that statement as I observed the procedures and use of products required for most dental laboratory procedures.

Several decades ago, we started our work on a die that may have contained air bubbles, inadequate remaining tooth structure or improper configuration.  Hence, the development by Dental Ventures of America of ZAPIT!

At the same time, the ‘separators’ available, were actually not separators, but they were lubricants that distorted wax patterns, and therefore the final castings.  Such was the generation of the development of the first, actual crown and bridge separator developed and introduced by DVA.

“Hotstikz,” eliminated the aggravation of requiring denture labs to use sticky wax during the articulation of models.

The introduction of zirconia required the need for a new standard of veneering polish; therefore,  DVA developed “Zircon-Brite.”  It has totally raised the bar in the performance of polishing products.

Such has been the history of Dental Ventures of America – a company that has a well established history of introducing new products to the dental laboratory market that do NOT require “corrections’ with use; they actually perform.

Such is certainly the case with DVA’s “CreamPress” pressing investment. While so many pressing investments are available, it seemed as though each one presented a differing challenge such that they required extra attention along with their use. Therefore, DVA saw another market opportunity, which was the genesis for the introduction of this new, extremely well-received product.

Among other things, “CreamPress” provides an incredibly clean, reaction-free, pressed object, which fits with an outstanding accuracy. And, if divesting takes longer than desired, the ease of the divesting of “CreamPress” further increases one’s appreciation of the benefits offered by this very unique product.

Given the very expressive comments of enthusiasm expressed by those using this product, DVA has managed to re-enforce its reputation of creating a higher level of product performance – “CreamPress” does what it was designed to do! It performs without having to make any “adjustments.”  It improves both production efficiency and accuracy! It’s “fiddle-free;” just use it!

Samples are available, so it might be advantageous to request them and see for yourself what is causing such positive reactions of appreciation by its users.

Summarizing “Polishing vs. Glazing”

In her article, published in the 2013/2014 issue of Dentistry Today, entitled, “Focus on: Monolithic Crowns,” Dr. Rella Christensen, PhD, who leads TRAC Research Laboratory, which is devoted to clinical research in oral microbiology and dental restorative concepts, offers an insightful summarizing overview of the ongoing impact of monolithic restorations.

 In the article, Dr. Christensen states that “monolithic crowns, which are made of one, uniform material, are taking over in the U.S. Today, major dental laboratories are reporting orders for lithium disilicate and zirconia restorations higher than for PFM’s.

 The article asks the question, “Have any clinical cautions been noted?”   Which generated the following response: “It is apparent that the glazes used on both materials will not be long lasting.”  Interestingly, it was reported that as the glaze deteriorates, it becomes rough and imparts increasingly more abrasion to opposing dentition.

Dr. Christensen, offers a summarizing statement that “In the future, surfaces will probably be polished rather than glazed.”

 Page 2 of the June 2014, Vol. 7; Issue 6 publication published and distributed by Clinicians Report, in response to the question, “Should BruxZir and e.maxCAD be final polished or glazed?” states that “After only six months, it was evident the glazes would not last long.”

Al-Wahadni and Martin also offer several statements in the Canadian Dental Association publication; issue 8; pointing out that “Many ceramists prefer polishing instead of glazing, to control the surface lustre,” and “Rosentiel et al found that the fracture toughness of polished porcelain was greater than that of glazed porcelain.”

 Click on the link below to discover DVA’s “Zircon-Brite,” a polish that has been selected among the Top Dental Products for three successive years. Zircon-Brite provides a very efficient and effective manner for polishing Lithium Disilicate and Zirconia restorations, in less than a minute polishing time. 

 http://dentalventures.com/zircon-brite/

The Founding of a Dental Company- Part 2

JPH NAVY“A Young Start”

In the first segment of my telling of the history of the founding of Dental Ventures of America, Inc., I mentioned how “happenstance” can impact one’s future. Such an occurrence was crucial in Jerry’s having become involved in dentistry. Upon graduation from high school in Fresno, California, Jerry wanted to be the first individual in his family to attend college. However, finding himself far short of having the financial support system to have that happen, he decided to forego his wish to further his education at that time, and instead opted to fulfill his military obligation by joining the U.S. Navy.
During his enlistment procedures, he was told he was qualified to go to any technical school he might request, and asked which area of training he would like to pursue. Having no actual idea, but having heard many stories from his three Irish-American uncles, who had all served in the Pacific campaigns during WWII. Jerry didn’t relish going to sea. With this factor in play, the young 17-year old merely asked his experienced enlistment officer which guys he didn’t care for. (as in, “Were jealous of?”) “Dental Technicians,” the officer replied, “they have it made! They always get to sleep on large beds, get to wear civilian clothes all the time, never have to stand watches during the night, get cars on the base, and seldom have to go to sea!” Need we guess which Navy technical school Jerry informed the officer he wanted to attend? Not only did the future Founder of Dental Ventures of America become a Dental Technician, he also went on to a second school to become a Navy Prosthetic Technician. There he learned that the enlistment officer was indeed correct!
Following his military service, Jerry trained himself to fabricate orthodontic appliances and opened a small lab in Covina, California, to support his university studies for the next eight years. Interesting though, that while he had been in the business world, Jerry never prepared himself for that area of activity; during all of those years of study, he never enrolled in one business course!
One day, Jerry took it upon himself to pay a visit to the largest manufacturer of orthodontic products to pick up an order he had placed with them. While he was there, thought he, why not take it upon himself to share his thoughts about the company’s lack of marketing their “fine products!” After sharing his words of inexperienced wisdom, regarding Unitek’s (now part of 3M) “obvious failures” at marketing, etc.. A week or so later, Unitek called him and offered him a position to improve things! So began the future Founder’s commercial dental career. Though he knew nothing about, had no experience, and no educational background regarding the mission to which he had been invited; namely, “Get Unitek, the largest manufacturers of orthodontic products (at the time) into the dental laboratory business!” So began the commercial experience of my husband!
More “Happenstance!” A scary position; but a great opportunity for growth and success!
But without any preparation, how was he going to succeed? (Check back for more…)

The Founding of a Dental Company

DentalVentures of america.Ever wonder how dental companies were, or are, founded? Well, my name is Judy and I’ve been associated with Dental Ventures of America, Inc., since its inception, and I thought it might be interesting to know why, when & how it began for “DVA”. Thus, the initiation of this series of short reports, which we hope will prove interesting, maybe not exciting, but interesting, reading.

 

Dental Ventures of America is a company that was established in 1981 with the thought of the Founder to find, develop and market ‘niche’ products that offered beneficial applications and performance to the dental laboratory industry.  Thus, the development of DVA’s motto, “Products that Perform!”

 

With a background as a dental technician, marketing executive and the first employee of a large, German multi-national company into the U.S. dental market, the eventual founder of DVA, Jerry Honstein, noticed that many small, useful products suffered from a lack of exposure because they simply did not offer the dollar thrust to the manufacturer as did those provided by large dollar volume product lines.  Made sens

e; but also offered an opportunity. Thus, was the concept for the founding of Dental Ventures of America, Inc., with its introduction of ZAPIT, a product that clearly established the “proof of concept” for the founder’s original vision.

 

The path from the Founder’s initial dental experience as a United States Navy Dental Technician, to the establishment of a dental company offers some support for the ultimate direction one’s life can be impacted by random experiences. We’ve all experienced the results of such ‘happenstance,’ and the development of DVA’s history was certainly a result of such a chain of events.

 

I had met the future founder of DVA when he was invited to lecture to my dental assisting class at Citrus College in Glendora, California. My name was Judy Cardellicchio at the time, but it is now Judy Honstein. Aha, now we begin to see how I have been “involved” with Dental Ventures of America from the very beginning.  Please join us as I try to share the path from “random events,” opportunities, experiences, failures, successes and some interesting history of the introduction of many new products that have served to change the face of dental laboratory products and procedures.

 

I look forward to meeting you all again soon,

 

Judy

Follow Us on LinkedIN

LIKE Us on Facebook

We Love Our Friends and Customers

We don’t really see a difference between our friends and our customers. We so appreciate the dentists, dental lab owners and dental techs who use our products. We have something special in common with them – we both know a good product when we see it. When they call us and tell us they have recognized the time and money savings they can achieve by using our products, well, I guess you could say it creates a bond. We work hard to offer just that kind of product so part of our reward comes when someone notices.

Like the call we have on our website from David Andrews about Waxie Paste. He didn’t think it was going to work when he first saw it. But he knows our product line and knows what we have been able to achieve for him up to this time. So he set his doubts aside for a moment.

He found that Waxie Paste gave him a great way to mark an implant case with a cantilever pontic. The indicating paper he had been using would get marks all over the place and as a result, there would be too much grinding away of material, which would leave a space underneath it. With the Waxie Paste, he got an accurate record of the interference.

When the Waxie Paste was brushed on, it went on evenly and he got an excellent indication of the exact adjustments that were needed. It didn’t take up any room to speak of so it was easy to get an accurate measurement. He said it was so much easier to use than similar products from our competitors and washed off easily.

He Practically Comparison-Tested Our Zircon-Brite

In a way, he did us a big favor with regard to our Zircon-Brite. He had a polishing compound he liked to use, but when he ran out of it, he couldn’t find where to get more. He began to buy and try one polish after another to find something comparable to the compound he ran out of. “I was on a mission,” he said. He ordered some from every manufacturer he could find. Some worked okay and some hardly worked at all.

In the end, he had gone through fourteen different products.

When he found Zircon-Brite, it was just what he was looking for so he could quit. It turned out that it was far more affordable than most of these other products. It’s not too surprising that he called me up to tell me that he loves these products.

If you’re already using our products, help us reach more people. Tell other technicians or dentists about our products and help them save time and money like you’re able to do. It may be hard to see the profit in sharing like this but it might just win you more friends in the long run. We know how valuable those friends are.

Hygiene in the Dental Lab and Chairside

While we are known as polishing gurus, we have not forgotten about your need for help with matters of hygiene. There are a few different dental lab products we provide that support your hygiene procedures.

Seal & Shine

When you deliver a denture, you want it to have a pleasant appearance and you want it to be sealed against any bacteria growth. This enables your patients to have a healthier environment in their mouths and keep down the growth of bacteria that could produce bad odors. A simple application of Seal & Shine on an acrylic denture and you will get the result you’re looking for. And your patient will see the beautifully finished denture they were expecting.

Ceramo-Dotz

When you are working with ceramic restorations, Ceramo-Dotz enables you to finish and polish these restorations in just about record time. Because these compounds come in individual ingots, you can work chairside without cross-contamination. Fast, one-step process eliminates the need for multiple steps and multiple polishing and shaping tools at this final step. Ceramo-Dotz will work with any ceramics, lithium disilicate or zirconia.

Compo-Dotz

This is the same type of product, but formulated for composite restorations. And again, it comes in ingots for operatory work.

Perfect Pour

We provide a complete kit for manufacturing full dentures, partial dentures, flippers, night guards and other items. The unique molecular structure of Perfect Pour eliminates porosity for less shrinkage and better protection against bacteria. Together with Shine & Seal, you offer your patients all the features they are looking for in dentures or night guards.

Our customers who stock our dental lab supplies love Perfect Pour. For that reason, we offer this product in a ten kilo bucket (that translates to 22 pounds) with five one-liter bottles of the liquid component. The is an economic way to stock Perfect Pour.

Acryl-Marvel

This is another fine operatory product. Many dental labs will send an acrylic bridge to a dental practice with a small amount of Acryl-Mavel. Then the practice can use Acryl-Marvel to restore the polish after a fitting.

For this purpose, Acryl-Marvel also comes in small ingots – these are shaped like a tooth. If the acrylic restoration needs any final polish after a fitting – and you know it happens frequently – then the practice has the individuals-sized supply of Acryl-Marvel right to hand. Here again, no cross-contamination.

We stay pretty familiar with the procedures you need to follow as you protect your patients from contamination issues. If you have an idea of a new product that would make your life simpler or improve hygiene in your practice even more, let us know. We are always interested in how we can help you streamline your processes even further. And frankly, we enjoy a good challenge.

n 1