Most of our products are meant for the lab, during manufacturing and finishing. But as any dental practice knows, there’s a certain amount of work that has to be done chairside. We have not overlooked this end of the production line. We have a whole range of products that help during those last few steps in the operatory.
Sure, you’re going to get the best fit possible in the manufacturing step, polish off any roughness and give an appliance or restoration a great shine. But in many cases, there’s a little bit of adjustment needed in the operatory. You need the dental lab supplies that work at this stage too, enabling you to re-smooth, re-polish a variety of materials. We’ve got what you need.
And just like with our other products that are used in the earlier steps of production, they save you time and steps which means everything goes faster. The patient is out the door sooner, with a great looking result.
Acryl-Marvel Adjustment Kit
When you have dentures that need refinishing, our Acryl-Marvel polishing compound can help. We provide this polish in small individual shapes that prevent any cross-contamination, once you have fit the denture to the patient. One small ingot per case. Minimal cost to you, no transference of contaminants.
You won’t have to pumice a piece that you are finishing and re-polishing. Acryl-Marvel will do the whole job. The final result will be so smooth and silky, it will resist the build-up of calculus.
Ceramo-Dotz
Here again, you avoid any cross-contamination by getting material in small dots. When the materials being used are lithium disilicate, lucite-based ceramics, zirconia or porcelains, this is what you want to use. It will do the same job as Acryl-Marvel, re-smoothing and re-polishing restorations in the operatory. You can get these in a jar of sixty individual ingots, one use per patient.
This product is often sent by a dental lab to an practice with the final ceramic restoration. We sell Ceramo-Dotz kits with just an individual ingot of material that a lab can send as a “thank you” gift to a practice that uses their services. It’s a nice touch.
First Step
This water-soluble gel adhesive comes in a handy syringe that enables you to put this adhesive right where you need it for a final try-in or adjustment procedure. Because it washes away, cleanup is simple and fast. And we made it colorless so you can get the true effect of laminate restoration and determine that the coloring is correct.
We provide this product in two syringes that each hold ten grams. This will get you through hundreds of restorations before you need to restock.
If there were enough of me, I could show you firsthand how much time our products can save you. As it is, I have to invite you to watch the video demonstrations we’ve got on our website. You’ll know immediately how much time we can save you and my work will then be done. Best wishes for your success.
Dental lab supplies
Dental products